Cleaning Heating Boiled Soak Tank Systems 320Liter 3000W Heating Power SUS316

Soak Tank's Cleaning Process

1. Items must be cleaned prior to disinfection. Wrap fragile items in gauze and put them in water to prevent bumping when boiling. Impervious items such as plates and bowls should be placed vertically to promote water convection. The water surface should be higher than the object. The sterilizer should be covered.
2. When sterilizing, calculate the time after the water boils. In general, it takes 15-20 minutes to boil contaminated hepatitis patient equipment and items for 30 minutes. If syringes and surgical instruments are to be sterilized, they should be boiled for 30-40 minutes. Adding 2% sodium carbonate can prevent rust, increase the boiling point (add 1% sodium carbonate in water, the boiling point can reach 100 ℃), and promote the killing effect on microorganisms.
3. When boiling cotton, it is not recommended to add too many items at once. When boiling, stir a little to help convection the water. If adding ingredients, increase the boiling time to 30 minutes or more.
4. Avoid creating air bubbles between items when sanitizing. Do not add substances that increase viscosity. During the disinfection process, keep the water boiling and don't add new contaminants along the way. Otherwise, the disinfection time must be recalculated after the water boils again.
5. Since there is no exterior when sterilized, please be careful to recontaminate it when you take it out and put it down. For sterile, unpackaged medical devices, strict aseptic technique requirements must be followed during retrieval and storage.

Heating Boiled soak tank systems

SUS316 soak tank systems

320Liter heated soak tank

Cleaning Heating Boiled Soak Tank Systems 320Liter 3000W Heating Power SUS316 Images